No. SS2-KFT100-0100 - 3 - Optional Specifications Item Specifications (1) External SP setting knob (for local setting) A setting knob is mounted on the door. SP can be adjusted from outside. (2) Built-in manual controller (with auto/manual transfer switch) Consists of a manual control regulator, two position transfer switch and balance check button. (3) With union Threaded union nut provided for connection with thermal well provided. (4) Pressure regulator with filter (not applicable to panel mounting type) Pressure regulator with filter plus 40 mm pressure gauge. (supply pressure; 200 to 970 kPa {2 to 9.7 kgf/cm2} output; 140 kPa {1.4 kgf/cm2}, pressure gauge; 0 to 200 kPa {0-2 kgf/cm2}) Optional Semi-standard and Special Specifications Item Specifications (1) Corrosion-resistant and silver finish (Y 138) Corrosion-resistant finish with baked acryl (Y138A) : Resistant against corrosive gases. Corrosion-proof finish with baked epoxy resin (Y138B) ; Resistant against corrosive liquids. Regular silver finish with baked acryl (Y138C) : To suppress temperature rise caused by direct or indirec sunlight and other cause. Corrosion-resistant silver finish with baked acryl (Y138D) : To suppress temperature rise caused as above and to be resistance against corrosive gases. (note : silver finish is not resistant against alkaline gases.) (2) Long type capillary tube (Y 160) 10 m (3) Special order items (The items mentioned in the right are available as special order items.) 1) Indication only 2) Door lock 3) Stainless steel tag plate 4) AUTO / MAN switch viewing window 5) Pressure gauge (40 mm) for transmitting signal 6 1