Azbil Corporation No. SS2-SLX100-0100 - 17 - Internal float type T: Top connection [Unit: mm] Note) 1: When pressure rating is JIS 10K, hub shown in the figure above will not be provided. (Standard, with indicator) (Standard, without indicator) (for high temperature, with indicator) (for high temperature, without indicator) (Standard) (for high temperature) Housing Sensor housing Torque tube housing Extension Bonnet Bolt / nut (refer to table 2) pc. Gasket Float Terminal connection (Terminal screw size: M4) refer to table 1 M4, Terminal screw for grounding Electric conduit connection port Mounting position: right side Note 1 (Refer to table 4) Table 1. Terminal Table 2. Bolt / nut material Table 4. Size H Symbol Description S+, S- Power suuply and output signal terminal CHK+, CHK- Terminal for check meter M+, M- Terminal for ammeter installed outside E Ground terminal Bolt / nut material U, M, A, E SNB7 / S45C * D, W SUS304/SUS304 Measuring range (mm) H 0 to 30 0 300 0 to 35 0 350 0 to 40 0 400 0 to 50 0 500 0 to 60 0 600 0 to 70 0 700 0 to 80 0 800 0 to 100 0 1000 0 to 120 0 1200 0 to 150 0 1500 0 to 200 0 2000 Table 3. Connecting flange size * When Y131 is specified, bolt/nut material shall be SUS304/SUS304. 80 mm 100 mm 125 mm 3 in. 4 in. 5 in. 80 mm 100 mm 125 mm 80 mm 100 mm 125 mm 3 in. 4 in. 5 in. D 185 210 250 190 229 254 200 225 270 210 240 275 210 254 279 G 126 151 182 127 157.2 185.6 132 160 195 140 160 195 127 157.2 185.6 T 18 18 20 24 24 24 22 24 26 28 32 36 28.5 32 35.5 f222 1.6 1.6 1.6 222222 1.6 1.6 1.6 C 150 175 210 152.4 190.5 215.9 160 185 225 170 195 230 168.1 200.2 235 H-N 19-8 19-8 23-8 19-4 19-8 22-8 23-8 23-8 25-8 23-8 25-8 25-8 22-8 22-8 22-8 Flange rating JIS 10K RF JIS 20K RF JIS 30K RF JPI ANSI 150 RF JPI ANSI 300 RF Case (Optional) (with indicator) (without indicator) External adjustment switch (when with indicator) 7 1