No. SS2-SLX100-0100 Azbil Corporation - 6 - INSTALLATION Electrical conduit G. internal thread, .NPT internal thread (JIS flameproof is not applicable) Grounding Resistance 100 Ω max. Wiring connection Wiring terminals screw (M4, SUS304) Process connection Flange External chamber type Connection Side - Side Side - Bottom Top - Side Top - Bottom Flange size 2 in. or 1. in. RF (ANSI / JPI 600) 2 in. or 1. in. RTJ (ANSI/JPI 600) Internal float type Connection Top Flange size 3, 4, or 5 in. RF (ANSI/JPI 600) 3 or 4 in. RTJ (ANSI/JPI 600) PERFORMANCE Accuracy rating (at load correction under standard operating condition) +/-0.5 % F.S. (for specific gravity, see Figure 2) Ambient temperature characteristics (Ambient temperature range: -30 to +80 °C, note1) Zero shift: ± (1.5 × α) % F.S. / 55 °C Span shift: ± (1.5 × α) % F.S. / 55 °C Fluid temperature characteristics (Fluid temperature range: -196 to +400 °C, note 1 and 2) Zero shift: ± (1.5 × α) % F.S. / 55 °C Span shift: ± (1.0 × α) % F.S. / 55 °C Note) 1) Correction factor “α” changes depending on the mass of measured fluid displaced by float “Mf” when liquid level changes from 0 to 100%. (In case model number is model SLX110, and its measurement range is 300 mm, and specific gravity is 1, “α” will be 1.) Wherein: D: Float diameter (mm) H: measuring range (Float length is standard, mm) γ: Specific gravity of measuring liquid ρstd:Standard density, ρstd = 1 (g/cm3) π: Circle ratio Note) 2) Only for liquid surface measurement, when temperature correction coefficient: a variable parameter to reduce the operating influence from the process temperature, is 1.0 (default value at shipment) (Not applicable for boundary surface level measurement) α ...... .... = -------- .... (π . ..) .... .. γ ρ...... .... × × × × × ... .. ........ .... ... π .... γ ρ...... + × × × × × = --------------------------------------------------------------------------------------